Pump Accessories

The Ronix Eight.3 Vented Valve Plug is a  1" port cap that are all made with two sided vent slots which help burp the bag of all extra air while filling, without taking off the cap completely.

The quick release connector has a hose barb fitting on one side and a 90 degree lockable female end on the other that will connect directly to the Fly High Flow-Rite Quick Release Connect.

O'Brien's Lightning Valve is attached to the towable, so there are no parts to keep up with or lose. The wider opening inflates and deflates 57% faster than our previous valves.

Get the lightning valve attachment here for your pump.

This easy-to-use mechanical air pressure gauge lets you accurately measure the psi in your inflatable to ensure best performance and help prevent a blowout.

15 pounds per square inch (psi) air pressure in NRS SUP boards gives you a rock-solid board. Hook the K-Air up to your K-Pump and day dream while you pump away.

The Ronix Eight.3 3/4″ Female NPT Thread- 3/4″ Barb Fitting is designed for certain internal Plug ‘N Play pumps. However the 1” NPT thread will connect to any Eight.3 ballast system port and clamps straight to your boats.

If you have multiple ballast bags, you'll need to purchase additional adapters for each bag to make them compatible with Ronix's PNP Pump. Adapters include the main pump connector to thread into the bag, and a cap to plug the connector when not in use.

Replacement O-Ring Gasket for the 5" NRS Barrel Pump.

Use lithium grease to re-lubricate the gasket.

Two of the nozzles work well for the type of valves found in some air mattresses.
The 5/8" diameter tip on the third nozzle fits some types of boat valves.
These nozzles also work with the Wonder Pump 6 Hand Pump.

The Boston valve is the industry-standard for all recreational towable tubes. One-way Air flow allows easy inflation with low-risk for deflation. Super-fast deflation as the valve unscrews from insert.

One of the Boston valves is sure to fit the thread pattern of your inflatable, no matter what brand.
The Boston valves have a square base, which is much easier to turn than a round base, especially with wet hands.