Pumps

Replacement hose for Red Paddle Co. Titan II Pump

Broke your hose? We've got you covered. 

O'Brien's Lightning Valve is attached to the towable, so there are no parts to keep up with or lose. The wider opening inflates and deflates 57% faster than our previous valves.

Get the lightning valve attachment here for your pump.

Holds your pump hose securely in Military/Leafield valves to free up both hands for smooth pumping.

The hole that runs through the adapter is 1/2" in diameter.

Red Paddle Co's. Replacement handle for Titan II inflatable paddleboard pump.

The quick release connector has a hose barb fitting on one side and a 90 degree lockable female end on the other that will connect directly to the Fly High Flow-Rite Quick Release Connect.

Just set the pressure and sip your coffee while the pump does all the work. Just set the pressure and sip your coffee while the pump does all the work. 

Fill Adapter for the New Short Halkey-Roberts Valve.

The NRS Mechanical Pressure Gauge helps you minimize the risk when inflating your boat and monitoring air pressure. This simple tool can save you a ton of headache and expense.

The Ronix Eight.3 3/4″ Female NPT Thread- 3/4″ Barb Fitting is designed for certain internal Plug ‘N Play pumps. However the 1” NPT thread will connect to any Eight.3 ballast system port and clamps straight to your boats.

If you have multiple ballast bags, you'll need to purchase additional adapters for each bag to make them compatible with Ronix's PNP Pump. Adapters include the main pump connector to thread into the bag, and a cap to plug the connector when not in use.

Replacement O-Ring Gasket for the 5" NRS Barrel Pump.

Use lithium grease to re-lubricate the gasket.

The Boston valve is the industry-standard for all recreational towable tubes. One-way Air flow allows easy inflation with low-risk for deflation. Super-fast deflation as the valve unscrews from insert.